Ridgid Pipe Threader 535 Threading Machine New Cart & 2 Universal Die Head 84097

The Ridgid model 535 is by far one of the most popular and reliable pipe threading machines Ridgid ever made. This machine includes a automatic oiler, oil reservoir, chip tray, large machine top cover for keeping tools and pipe fittings handy. Also included is a front speed chuck with rocker-action jaws. The rocker-action jaw inserts are replaceable, if ever needed. The front speed chuck centers and grips the work piece instantly.

The carriage assembly includes a reamer and pipe cutter. Also includes: new cart with wheels. 2 Ridgid 1/8" to 2" NPT Universal Die Head with an Extra Set of Brand New Pipe Threading Dies. 3 new sets of bolt threading dies. Safety foot switch and extra parts.

Some features may not be available on mobile devices. Ridgid Pipe Threader 535 Threading Machine New Cart & 2 Universal Die Head 84097. This Machine is the Workhorse of the Pipe Industry!

This genuine Ridgid 1/8" to 2" threading package includes the following. Ridgid 535 Pipe Threading Machine. This machine includes a built-in automatic oiler, 1.75 gallon oil reservoir, chip tray, and a large machine top cover for keeping tools and pipe fittings handy.

There is also a rear centering chuck that turns with the front speed chuck. This machine also has a Ridgid high clearance carriage assembly.

The carriage assembly includes a sharp reamer with no dings or chips anywhere. The pipe cutter looks almost new and will cut pipe up to 2. The pipe cutter's cutting wheel does not have any chips, breaks, or dings.

This pipe cutter also turns very smooth. Absolutely no binding, slop, or play when opening or closing.

There is a handle on the front of the pipe threading machine to move the carriage forward and back, and a handy carriage-mounted pipe gauge. See photos 1 to 12. New Cart / Stand with Wheels.

This is a well-built and sturdy cart that will help make moving this pipe threading machine easy. The storage shelf area is handy for die heads, fittings, and accessories!

Ridgid 1" to 2" NPT Universal Die Head with an Extra Set of Brand New Pipe Threading Dies. This die head is in excellent condition.

The pipe threading dies are sharp and in near perfect condition. No broken teeth or rust anywhere!

It is always a good idea to have an extra set of pipe threading dies on hand. See photos 13 and 14.

Ridgid 1/2" to 3/4" NPT Universal Die Head with an Extra Set of Brand New Pipe Threading Dies. This die head is also in excellent condition. See photos 13 and 15.

Brand New Ridgid 1/4" to 3/8" NPT Pipe Threading Dies. These pipe threading dies fit the above Universal die heads.

This die set has never been used or installed and is sealed in Ridgid packaging. Brand New Ridgid 1/8 NPT Pipe Threading Dies. These pipe threading dies also fit the above Universal die heads.

Brand New Ridgid 9/16 - 12 UNC Bolt Threading Dies. These bolt threading dies also fit the above Universal die heads. The teeth are in perfect condition. No chips, breaks, or dings anywhere!

Brand New Ridgid 7/8 - 9 UNF Bolt Threading Dies. Brand New Ridgid 1 1/4 - 7 UNC Bolt Threading Dies.

This bolt threading die set also fits the above Universal die heads. Brand New Extra Maintenance Parts.

This machine is one of the nicest and best conditioned machines I have ever listed. This machine and all of the accessories are clean enough on the inside and outside that you could eat your lunch off of them!

Take a look at all of the photos and see if you agree. I have also used Ridgid 300 machines in the past. It is my personal opinion the Ridgid 535 machine is a far better overall machine than the Ridgid 300 or Ridgid 1822-I. I will tell you why.

The Ridgid 535 front and rear bearings are much larger and stronger than a Ridgid 300. The Ridgid 535 machine is designed to be able to take more torque and stress.

The 1822-I has front and rear chuck covers that are unfortunately made out of plastic! Every used Ridgid 1822-I I have ever seen has a broken front and/or rear chuck cover. Also the Ridgid 1822-I base housing is made out of fiberglass; whereas, the Ridgid 535 is made completely from aluminum and steel. There is absolutely no plastic on a Ridgid 535, except for the electrical parts.

A Ridgid 535 machine is designed to be able to withstand a beating and keep running. This machine was completely torn down and every nut, bolt, and part has been completely inspected, measured for wear tolerances, cleaned, and greased if needed. After this machine was inspected and re-assembled, I tested this machine under a load threading 2 pipe and it works perfectly as it should.

I inspected the front speed chuck, front jaws, and all of the bearings. The front speed chuck opens and closes very smoothly just like a well-made Swiss watch. There is absolutely no play or slop in the front speed chuck assembly. The front and rear bearings are also in excellent condition. I placed a precision dial caliber on the power shaft to measure the bearing and power shaft run out. The run out was less than. You cannot get much better on a new Mercedes! All of the gears inside and outside of the motor housing are sharp, and I did not find or see any wear or chipped teeth in any of the gears. The motor brushes were inspected and are in excellent condition. The power cord is also in excellent condition and has a molded factory original plug (OSHA compliant). The machine and all of the electrical components are properly grounded. This threading machine should give you years of profitable service! This Ridgid 535 threading machine is in almost new condition, and I do not think you will find a nicer used Ridgid 535 threading machine anywhere! If you are looking for a reliable and trouble-free threading machine that is fast and efficient with maximum up-time, this is the threading machine for you! Please take the time to read the comments I have received in my feedback from my past buyers. These comments will help convince you that this pipe threading machine is everything I state it is. Nobody can beat my guarantee or friendly service! Here is your chance to make your life easier! I only offer good quality new and used tools in top condition you will be proud to own! And take a look at my other similar items!

Add me to your Favorite Sellers. The machine and each of the individuall accessories will be bubble wrapped and boxed. This machine will then be delivered to either the t.

Your residence must be accessible with a big truck. No questions asked and no hassles. If this item fails during the first year, simply send it back to me at your expense. If a repair or replacement is needed, I will send the repaired or replaced item back to you at my expense.

I will be available to answer any of your questions or concerns Monday through Saturday from 7:00 a. Can't Find What You Are Looking For? I have a large inventory of new and used Ridgid plumbing tools, equipment, and repair parts. I also have Victor, Harris, Smith, and ESAB welding tools, equipment, and repair parts.

Get Supersized Images & Free Image Hosting. Create your brand with Auctiva's. Attention Sellers - Get Templates Image Hosting, Scheduling at Auctiva. The item "Ridgid Pipe Threader 535 Threading Machine New Cart & 2 Universal Die Head 84097" is in sale since Sunday, August 11, 2019. This item is in the category "Business & Industrial\Light Equipment & Tools\Pipe Tools\Pipe Threaders, Taps & Dies".

The seller is "cooltools77" and is located in Midvale, Utah. This item can be shipped worldwide.

Brand: Ridgid
Model: 535
Type: Pipe Threading Machine with 2 Universal Die Heads
Includes: Over $1400.00 In New Threading Dies
Also Includes: New cart
Thread Size(s): 1/8 to 2 inches
MPN: 84097
Warranty: 1 Year Parts and Labor
MSRP: $11,108.25
Shipping: Free to 48 states
Country/Region of Manufacture: United States