THIS IS WITHIN THE 48 STATES (OR TO SOME PARTS OF CANADA)! YOUR LOOKING A USED BUT VERY NICE RIDGID 535 THREADER, IN "VERY NICE CONDITION "! IT COMES WITH A 811A SELF OPENING, SELF OILING DIE HEAD LOADED WITH DIES 1/2"-3/4"AND WHAT LOOK LIKE A NEW SET OF 1"-2", WITH THE THROUGH THE HEAD OILING SYSTEM this means as the pipe is being threaded, oil is automatically pumped through the die heads keeping the cutting teeth bathed in oil and when the threading is done. The die head open with the flip of a lever, so you can back off the carriage without having to reverse the threader!This saves a full step and probably cuts the time to thread a pipe by 25%! I BELIEVE THE 535 IS A BETTER UNIT THAN THE 1822-I, IN SOME WAYS. THIS 535 IS ALL METAL, EXCEPT FOR THE FIBERGLASS COVER AND THE PLASTIC TOOL CABINET! THE 1822-I HAS A FIBERGLASS COVER AND A FIBERGLASS UNDERBELLY. THE 1822-I ALSO HAS A PLASTIC FRONT AND BACK COVER. IT IS ALSO BETTER THAN THE RIDGID 300, BECAUSE IT HAS A BUILT IN OILER. THE OIL IS PUMPED THROUGH THE DIE HEAD AND FLOWS ON TO THE PIPE AND DIES WHILE THREADING. FROM THERE THE OIL DROPS THROUGH A SCREEN LEAVING THE LARGER CHIPS BEHIND AND THEN INTO THE OIL RESERVOIR. THE RESERVOIR HAS ANOTHER SUCTION SCREEN WHERE THE FINES ARE FILTERED OUT AND LEFT IN THE RESEVOIR. THIS UNIT IS VERY NICE! THIS UNIT CAN ALSO THREAD UP TO 4"-6" PIPE WITH AN ADDITIONAL ATTACHMENT OF A RIDGID 141, OR 161 PIPE THREADER (not included, but available in our other auctions) SEE THE LAST PIC'S SHOWING INSTRUCTION MANUAL (owners manual included)! WHAT YOU SEE IN THE PIC'S IS WHAT YOU GET AND NOTHING MORE!
A OPERATORS MANUAL IS INCLUDED, AS WELL AS A BLOW-UP/PARTS LIST! FOR THE OTHER SET OF DIES.. THIS IS A VERY NICE UNIT!
CHECK OUT THE PIC'S! Large 1.75 gallon oil tray.Generous top cover for keeping tools and fittings handy. Speed chuck with rocker-action jaws centers and grips workpiece instantly. Can be used with geared threaders Models 141 and 161. Uses Models 816/817 semi-automatic, Model 815A self-opening or Model 811A quick-opening die heads. Length gauge for quick, accurate cut-off. Approved to UL Standards (NRTLC). Pipe Capacity: 1/8" - 2" (3 mm - 50 mm) 2 1/4" - 4" (62 mm - 100 mm), 4" - 6" (100 mm - 150 mm) with 141 and 161 Geared Threaders. Bolt Capacity: 1/4" -2" (6 mm -50 mm). Motor: 1/2 HP, single-phase, 115V, 25-60 Hz, 15 Amp Reversible Universal motor. Switches: FOR/OFF/REV and Integral Safety Foot Switch. Chuck: Speed Chuck with replaceable rocker-action jaw inserts (3). Rear Centering Device: Cam-action, turns with chuck. Two models available: 1 Standard. 820 Wheel-Type Cutter, pipe capacity 1/8" - 2" (3mm-50mm), bolt capacity 1/4" - 1" (6mm-25mm). 821 Blade-type cutter, pipe capacity 1/2" - 2" (12mm-50mm).
Spindle Speed: 36 RPM standard (no load), 54 RPM model also available. Reamer: 5-flute cone, RH, 1/8 "- 2" (3 mm - 50 mm). Oil Pump: Self-priming gerotor oil pump. EASY TO DEAL WITH, AND MOST OF THE TIME SAME DAY APPROVAL! WE ALSO HAVE GREENLEE 555, 854's & 855's AND RIDGID BRAND PIPE THREADERS 300's, 1822's, 1224's, 535's, ETC.
SO, PLEASE SEE OUR OTHER ITEMS LISTED! Add a map to your own listings. The item "RIDGID 535 811A DIE 1822 300 PIPE THREADER DIE HEAD THREAD 4-6 With141 161" is in sale since Saturday, March 2, 2019. This item is in the category "Business & Industrial\Light Equipment & Tools\Pipe Tools\Pipe Threaders, Taps & Dies".The seller is "sr6933" and is located in 80 Miles West of Chicago. This item can be shipped to United States.