THIS UNIT DOES NOT HAVE THE SMALL BLACK PLASTIC BOX SEEN IN THE PIC'S, OTHER THAN THAT IT IS IDENTICAL. THERE IS NOTHING IN IT ANYHOW. THIS IS WITHIN THE 48 STATES (and some parts of Canada), TO A BUSINESS WITH A DOCK OR FORKLIFT FOR UNLOADING! THIS IS A "USED" 2018 year, 120 VOLT RIDGID 1224, BUT IT'S IN "BARELY USED TO LIKE NEW" CONDITION! IT COMES WITH A SET OF 2 DIE HEADS AND 3 SETS OF DIES!A 711 SELF-OPENING DIE HEAD LOADED WITH A SET OF 1"-2" DIES, A SET OF NEW 1/2"-3/4" DIES, AND A 714 DIE HEAD WITH A SET OF 2-1/2"-4" DIES. BOTH DIES HEADS ARE RECEDING , WITH A THROUGH THE HEAD OILING SYSTEM this means as the pipe is being threaded, oil is automatically pumped through the die heads keeping the cutting teeth bathed in oil and when the threading is done, the die head automatically opens, so you can back off the carriage without having to reverse the threader or open the die head manually! This saves a full step and probably cuts the time to thread a pipe by 25%! A OPERATORS MANUAL IS INCLUDED , AS WELL AS A BLOW-UP/PARTS LIST!
THIS IS A VERY NICE THREADER! ALL DIE TEETH ARE PERFECT ONE SET IS NEW!
THE UNIT HAS BEEN TESTED AND IS WORKING FINE! THAT'S WITH ONLY TWO DIE HEADS AND NO ROLLING STAND! DON'T LET THIS DEAL GET AWAY! THIS UNIT IS IN LIGHTLY USED TO LIKE NEW CONDITION!
IT HAS BEEN DETAILED AND TOUCHED UP WHERE NEEDED! Threads 1/4"-2" pipe at 36 RPM and 2-1/2"-4" at 12 RPM. The 1224 threads a wide range of pipe including black, galvanized and plastic-coated pipe, together with stainless steel, IMC and heavy-wall conduit, as well as rod up to 30 Rockwell C. An induction motor helps insure sounds levels well within the limits set by the regulating authorities.A special capacitor-start / capacitor-run motor allows the 1224 to thread a full range of material where voltage drop is experienced. 1/4"-2" Universal Die Head; 2-1/2"-4" receding die head allows cutting of tapered or straight NPT/NPSM or BSPT/BSPP threads. Constant and proper lubrication of dies and workpiece with through-head oiling. Approved to UL Standards (NRTLC).
Pipe Capacity: 1/4" - 4" (6 mm - 100 mm), 4" - 6" (100 mm - 150 mm) with 161 Geared Threader. Bolt Capacity: 1/4" - 2" (6 mm - 50 mm). Motor: 1-1/2 HP, single-phase, 60 Hz or 50 Hz, induction type. Motor Control: Reverse/off/forward, heavy-duty rotary-type and integral foot switch.Gear Box: Two-speed gear box 3:1 ratio. Chuck: Hammer-type with replaceable rocker-action jaw inserts. Cutter: Model 764 full-floating, self-centering 1/4 "- 4" with F-229 cutter wheel. Reamer: Model 774, 1/4" - 4" blade-type. Pump: Self-priming, gerotor-type, automatic-reversing, constant flow.
1224 threading machine with foot switch -(1) No. 714 (914) 2 1/2"-4" receding self-opening die head & dies. 711 (911) 1/4"-2" universal self-opening die head & 1"-2" dies.
744 reamer -(1) No. WE ALSO HAVE GREENLEE 555, 854's & 855's ANS RIDGID BRAND PIPE THREADERS 300's, 1822's, 1224's, 535's, ETC. Add a map to your own listings.The item "Ridgid 1224 Pipe Threader 1/2-4 LIGHTLY USED 2 Die Heads! 711 714 to 6 With 161" is in sale since Wednesday, August 8, 2018. This item is in the category "Business & Industrial\Light Equipment & Tools\Pipe Tools\Pipe Threaders, Taps & Dies".
The seller is "sr6933" and is located in 80 Miles West of Chicago. This item can be shipped to United States.