Fixed Rod: The rod can help you fix the pipe and make the pipe attached to each other as to how you want them to be. You can have a better work performance with this rod. Suitcase: The package comes in a suitcase, so you can store and carry them easily and don't lose the machine parts. This machine is suitable for threading galvanized pipes, iron pipes, PP pipes, and tubes. It is suitable for threading various water, electric, or gas pipes from 20.9mm to 49.6mm.Threading range: 20.9-49.6mm/0.5-2in. Material: All copper wire machine.
Voltage:110 V, 60 Hz. Rated spindle speed: 25 (r/min). Size: 1/2, 3/4, 1, 1-1 / 4, 1-1 / 2, 2 (inch). Product dimensions : 57x14 x31cm/22.44x5.51x12.2in.Outer pipe diameter: 22,27,34,42,48,60mm. Inner pipe diameter: 15,20,25,32,40,50mm. You should select the corresponding die head. The blade is installed from the right on the host.
Clamp the tube to approximately the same length as the arm (L2 is approximately equal to L1). Turn the front and rear switches to the down arrow position to start the switch and auxiliary contacts. For hard pipes such as stainless steel pipes, galvanized pipes, brass when refueling in time, plastic pipes without fuel. Note that the tube holder can not be touched with the host during the right shift, otherwise it will hurt the host. After the machine stopped, pull up the reverse switch and exit the tube.
This product supports the use of standard tubes. Add the lubricating oil every time you use it. Please allow 1-3 cm error due to manual measurement. This item is in the category "Business & Industrial\Light Equipment & Tools\Pipe Tools\Pipe Threaders, Taps & Dies". The seller is "2020augustshop" and is located in this country: US.
This item can be shipped to United States.