THIS IS WITHIN THE 48 STATES (OR TO SOME PARTS OF CANADA)! YOUR LOOKING A USED BUT NEWER 535A RIDGID THREADER, IN "VERY NICE CONDITION "! IT COMES WITH A 811A SELF OPENING, SELF OILING DIE HEAD LOADED WITH DIES 1/2"-3/4"AND WHAT LOOK LIKE A NEW SET OF 1"-2", WITH THE THROUGH THE HEAD OILING SYSTEM this means as the pipe is being threaded, oil is automatically pumped through the die heads keeping the cutting teeth bathed in oil and when the threading is done, the die head automatically opens, so you can back off the carriage without having to reverse the threader or open the die head manually! This saves a full step and probably cuts the time to thread a pipe by 25%! THIS UNIT ALSO HAS AN AUTOMATIC CHUCKING SYSTEM THAT CHUCKS DOWN ON THE PIPE WITH THE FLIP OF A SWITCH AND UNLOCKS, OR UNCHUCKS WITH A FLIP OF THE REVERSING SWITCH.THIS UNIT INCLUDES A RIDGID ROLLING WHEELED STAND WITH A PLASTIC TOOL TRAY! ALL DIE TEETH ARE PERFECT, NO CHIPS AND ONE SET IS NEW!
There is a fracture on the plastic around the oil/chip strainer. Cosmetic only and doesn't affect the return of oil to the reservoir, but wanted to make sure it was mentioned. A OPERATORS MANUAL IS INCLUDED , AS WELL AS A BLOW-UP/PARTS LIST! THIS UNIT CAN ALSO THREAD UP TO 4"-6" PIPE WITH AN ADDITIONAL ATTACHMENT OF A RIDGID 141, OR RIDGID 161 PIPE THREADER (not included, but available in our other listings). SEE THE LAST PIC'S SHOWING INSTRUCTION MANUAL (manual included)!
What you see in the pic's is what you get and nothing more! FOR THE OTHER SET OF DIES.. THIS IS A VERY NICE UNIT!
CHECK OUT THE PIC'S! Model 535A Automatic Threading Machine. Large 1.75 gallon oil reservoir. 100% greater chip tray capacity. Generous top cover area for keeping tools and fitting handy.
Can be used with geared threader Model 141. Uses Model 816/817 semi-automatic, Model 815A self-opening or Model 811A quick-opening die heads. Length gauge for quick, accurate cut-off. Approved to UL Standards (NRTLC).
Pipe Capacity: 1/8" - 2" (3 mm - 50 mm) 2 1/2" - 4" (62 mm - 100 mm) with 141 Geared Threader. Bolt Capacity: 5/16" - 2" (8 mm - 50 mm). Motor: 2 HP, single-phase, 115V, 60 Hz, 20 Amp Reversible Induction Motor. Switches: FOR/OFF/REV and Intergral Safety Foot Switch. Chuck: Automatic with four reversible forged jaws.
Rear Centering Device: Automatic, centering only. Two models available: 1 Standard. 820 Wheel-Type Cutter, pipe capacity1/8" - 2" (3mm-50mm), bolt capacity 1/4" - 1" (6mm-25mm). 821 Blade-Type cutter, pipe capacity 1/2" - 2" (12mm-50mm). Spindle Speed: 3 speed 16/46/58 RPM.Reamer: 5-flute cone, RH, 1/8"-2" (3 mm - 50 mm). Oil Pump: Self-priming gerotor oil pump.
EASY TO DEAL WITH, AND MOST OF THE TIME SAME DAY APPROVAL! WE ALSO HAVE GREENLEE 555, 854's & 855's AND RIDGID BRAND PIPE THREADERS 300's, 1822's, 1224's, 535's, ETC. SO, PLEASE SEE OUR OTHER ITEMS LISTED! Add a map to your own listings.
The item "RIDGID 535A Auto Chucking PIPE THREADER 1822 811A DIE HEAD THREAD 4-6 With141 161" is in sale since Sunday, September 11, 2016. This item is in the category "Business & Industrial\Light Equipment & Tools\Pipe Tools\Pipe Threaders, Taps & Dies". The seller is "sr6933" and is located in 80 Miles West of Chicago. This item can be shipped worldwide.