Pipe Threader Machine

Ridgid 1822-I Auto-Chucking Pipe Threader 535 Two 815a DIE HEADS 4-6 w 141 161

Ridgid 1822-I Auto-Chucking Pipe Threader 535 Two 815a DIE HEADS 4-6 w 141 161
Ridgid 1822-I Auto-Chucking Pipe Threader 535 Two 815a DIE HEADS 4-6 w 141 161
Ridgid 1822-I Auto-Chucking Pipe Threader 535 Two 815a DIE HEADS 4-6 w 141 161
Ridgid 1822-I Auto-Chucking Pipe Threader 535 Two 815a DIE HEADS 4-6 w 141 161
Ridgid 1822-I Auto-Chucking Pipe Threader 535 Two 815a DIE HEADS 4-6 w 141 161
Ridgid 1822-I Auto-Chucking Pipe Threader 535 Two 815a DIE HEADS 4-6 w 141 161
Ridgid 1822-I Auto-Chucking Pipe Threader 535 Two 815a DIE HEADS 4-6 w 141 161
Ridgid 1822-I Auto-Chucking Pipe Threader 535 Two 815a DIE HEADS 4-6 w 141 161
Ridgid 1822-I Auto-Chucking Pipe Threader 535 Two 815a DIE HEADS 4-6 w 141 161

Ridgid 1822-I Auto-Chucking Pipe Threader 535 Two 815a DIE HEADS 4-6 w 141 161

THIS IS WITHIN THE 48 STATES! YOUR LOOKING A USED BUT NEWER 1822-I RIDGID THREADER, IN "VERY NICE CONDITION "! IT COMES WITH A 815A SELF OPENING, SELF OILING DIE HEAD LOADED WITH DIES 1/2"-3/4"AND WHAT LOOK LIKE A NEW SET OF 1"-2", WITH THE THROUGH THE HEAD OILING SYSTEM this means as the pipe is being threaded, oil is automatically pumped through the die heads keeping the cutting teeth bathed in oil and when the threading is done, the die head automatically opens, so you can back off the carriage without having to reverse the threader or open the die head manually!

This saves a full step and probably cuts the time to thread a pipe by 25%! THIS UNIT ALSO HAS AN AUTOMATIC CHUCKING SYSTEM THAT CHUCKS DOWN ON THE PIPE WITH THE FLIP OF A SWITCH AND UNLOCKS, OR UNCHUCKS WITH A FLIP OF THE REVERSING SWITCH.

NOTE: THE CHUCKING SYSTEM ON THESE UNITS IS DESIGNED TO CHUCK DOWN TIGHTLY ON THE PIPE WHEN ROTATING IN THE FORWARD POSITION, WHILE CUTTING, REAMING OR THREADING. WHEN YOU STOP THE ROTATION, THE PIPE IS SLIGHTLY LOOSE IN THE JAWS WHICH IS NORMAL!

WHEN YOU REVERSE THE ROTATION, THE JAWS OPEN UP AND THE PIPE IS FREE TO PULL OUT! THIS UNIT WILL ALSO DO LEFT HAND THREADING (see the manual). THIS UNIT INCLUDES A RIDGID ROLLING WHEEL STAND! ALL DIE TEETH ARE PERFECT, NO CHIPS AND ONE SET IS NEW!

There is a fracture on the plastic around the oil/chip strainer. Cosmetic only and doesn't affect the return of oil to the reservoir, but wanted to make sure it was mentioned. THIS UNIT CAN ALSO THREAD UP TO 4"-6" PIPE WITH AN ADDITIONAL ATTACHMENT OF A RIDGID 141, OR RIDGID 161 PIPE THREADER (not included, but available in our other auctions) SEE THE LAST PIC'S SHOWING INSTRUCTION MANUAL (manual included)! What you see in the pic's is what you get and nothing more! THIS IS A VERY NICE UNIT! CHECK OUT THE PIC'S! Threads a wide range of material including black and galvanized pipe, stainless steel, IMC, PVC and heavy-wall conduit. Induction motor (81 db) delivers constant 45 or 16 RPM as required. Constant and proper lubrication of dies and workpiece with through-head oiling. Triple filtration provides for longer oil pump life and clean threads. High impact-resistant covers for durability. Special jaw inserts allows for quick, easy replacement. Pipe Capacity: 1/8" - 2" (3 mm - 50 mm), 2 1/2" - 4" (62 mm - 100 mm) with No. Bolt Capacity: 1/4" - 2" (6 mm - 50 mm). Motor: 1 1/2 HP, single-phase, 60 Hz or 50 Hz, induction.

Motor Control: Open/Off/Close, heavy-duty rotary type switch and integral safety foot switch. Spindle Speed: 45 and 16 RPM, right hand, can be adapted to left hand operation. Transmission: Two-speed (45 RPM for standard pipe and 16 RPM for low-voltage and special materials). Rear Centering Device: Automatic, centering only.

Cutter: Model 364, 1/8" - 2" full-floating, self-centering with E-1032 Cutter Wheel. Reamer: Model 344, 1/8" - 2" right hand only. WE ALSO HAVE GREENLEE 555, 854's & 855's AND RIDGID BRAND PIPE THREADERS 300's, 1822's, 1224's, 535's, ETC. SO, PLEASE SEE OUR OTHER ITEMS LISTED! Add a map to your own listings.

The item "Ridgid 1822-I Auto-Chucking Pipe Threader 535 Two 815a DIE HEADS 4-6 w 141 161" is in sale since Sunday, February 28, 2016. This item is in the category "Business & Industrial\Light Equipment & Tools\Pipe Tools\Pipe Threaders, Taps & Dies". The seller is "sr6933" and is located in 80 Miles West of Chicago. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
  • Country of Manufacture: United States
  • Model: 1822-I
  • Type: Machine
  • Make: Ridgid

Ridgid 1822-I Auto-Chucking Pipe Threader 535 Two 815a DIE HEADS 4-6 w 141 161